POLJOT watch is the first-class-quality
product with its DI 29 mm mechanism with 17 rubies comprising
of the additive timer, signalling device, anti-shock equipment,
being absolutely waterproof. The watch contains two independent
mechanisms, one for hours and the other for signalling with
the individual spring actuated mechanisms with two controlling
crowns: the upper alarm button (signalling mechanism) and
botton crown (hour mechanism).
a/ Normal position-Winding
up the watch
b/ First click-Time setting
c/ Winding UP the alarm
d/ Alarmsetting
- Average daily watch operation
under the temperature of +/-20'C (+/-5°C) from -2 to +5
sec per day
- Period of the watch energy independence with the total
windig up of the mechanism 42 hours
- Average life period minimally 10 years
- Watch-case surface 5 mcar.gold
- Balance wheel oscillation period 0,4 sec.
- Sound signal interval minimally 10 sec.
How
to Use Your Watch
The watch is a complex
apparatus requiring an adequate treatment. Observing any
our advice for the use will ensure the long-term life
of operation, performance and accuracy of your watch.
The watch is winding
up through turning the crown. Winding up should be quit
immediately when the crown is resistant against its turning.
Winding up the signalling
spring is done through turning the alarm button. After
completing this action you can listen a short beep.
For setting the hour
and minute hands it is necessary the crown to be pulled
out softly from the watch-case since its fixed position
and through turning the crown to move the hands in the
clock-wise direction. When the hands reach the current
time, push back the crown to its starting position. Never
turn the crown in the counter-clock-wise direction due
to possible damage of the signalling equipment and failure
of your watch.
Setting the required
time for the signalling mechanism is done with the alarm
button. Softly pull out the alarm button to the fixed
position and turn it in the counter-clock-wise direction
and the alarm hand is turning against the hour and minute
hands. After setting the alarm hand to the required position,
turn the alarm button back by 12 up 1 revolution (while
the alarm hand is not moving) and then push backthe alarm
button to its starting position. For switching off the
signalling it is necessary to pull out the alarm button
from the watch-case, to set the alarm hand to any other
position than before and next to push the alarm button
to the watch-case.
Your watch is repairable.
It will serve you for the long time reliably keeping its
accuracy if you follow these rules:
Regularly winding
up your watch once per 24 hours (recommended in the
morning) until the full winding up of the spring.
Minimally once per
two years after elapsing the guarantee period allow
your watch to be cleaned, lubricated and set up with
the qualified repairer.
Protect your watch
against the fall, extreme shocks, strong magnetic
field and effects of chemicals
Every 2-3 years to
check the hermetic sealing protecting water and dust
leakage. This sealing is produced of wearing material.
-After any contact with the sea water, rinseyourwatch
with the potable water and wipe it carefully.
Please
Follow Our Recommendations:
Never open the cover
of the watch-case. Avoiding any opening you are protecting
your watch against any unqualified touch and leaking dust
and impurities info the mechanism.
Never expose your watch
to the high temperature differences that could lead to
sweating watch-glass.
