The POLJOT watch is a first
quality product with a 23 ruby movement comprising of the
additive timer, calendar display, and anti-shock equipment.
The watch indicates accurate time in hours, minutes, seconds
as well as the day of the month. This watch is aimed at
measuring time intervals within 30 minutes in minutes and
seconds.
TY25.07.1539-84
Caliber 31 mm
Height 7.35 mm
Side second hand
Date-of-the month calendar
Stopwatch: summing-up
function
Central chronograph
hand
Side hand of minute
counter 30-min capacity of minute counter scale
23 Ruby jewels
Balance period 0.33(3)s
Mean daily rate from
- 10 to + 20 s/day
Minimum 42-h of work
with full winding with stopwatch turned-off, at least
37-h
winding with stopwatch
turned-on
a/ Winding up the watch
b/ First click - Time and date setting
- Average daily rate at
a temperature of±20°C (±5°C) from -2 to +5 sec per day
- Winding the watch completely gives the watch 42 hours
of running time
- With minimal care the watch has an average life span of
ten years
- Watch-case surface 5 mcac. gold
ATTENTION,
PLEASE
The Model 3133 movement
includes a chronograph timer. This is activated by pushing
the timer button.
For stopping the timer
it is required to press the timer button once more.
For setting the timer
to the zero position it is required to press the reset
timer button.
The timer is intended
solely for measuring short time intervals.
CAUTION: Pressing the
reset timer button while the timer is running will cause
a failure of the mechanism!
Use timer 30min max
! It is not made to run all the time - your watch will
gain or loose time!
USER'S
MANUAL
Your watch will serve
you reliably assuming you diligently follow our advice:
Regularly winding up your
watch once per 24 hours (recommended in the morning) until
you feel resistance. Protect your
watch against falling, extreme shocks, strong magnetic
field, water and the effects of harsh chemicals.
To maintain the high
accuracy of your watch it is necessary to have it services
regularly. Have it cleaned, lubricated and adjusted
by a qualified watch repairman every two or three years.
Avoid exposing
your watch to sudden changes of temperature to prevent
sweating under the watch-glass.
For setting the hour
and minute hands it is necessary to pull the crown
out softly from the watch-case. Once the crown is in this
position, you simply turn it clockwise or anti-clockwise
to adjust the hour and minute. Once completed, simply
push the crown back in.
For setting the date
display it is required to get the crown to the "time setting"
position and turn the hands in the clockwise direction
until the change of the date and until the hands reach
the point "01.00 hours".
In the case of the need it is possible to shift the
date by several days back through turning the crown
in the reverse direction until the point "10.00 hours"
and then back in the clock-wise direction to the point
"01.00 hours" For any cycles of shifting the hands within
the time interval from 01.00-10.00-01.00 hours, the date
is changed by one day.
For starting and
stopping the timer it is required to press the timer
button. Returning the timer to its starting (zero) position
is done via pressing the reset timer button after stopping
the timer with the timer button.
For the addition
of timer intervals after every stopping it is required
to launch it again and stop the timer with the timer button.
To set the phase
of the Moon : the watch crown should be brought to
the position of dale-setting and then the phase of the
Moon is set. When it reaches the right size, you should
set the time and return the watch crown. Note: when moving
the hands past midnight, the date will change automatically.
Thus, it should be adjusted together with the Moonphase
setting.
